products: primers
Verda Stock Primer Interior
Code: 1005
Product Description
A high performance vinyl acrylic formulated for low VOC resulting in a low odor environmentally friendly product.
Uses
- A fast drying latex primer designed as a first coat for interior applications to drywall and wood.
Technical data
- Type: Vinyl Acrylic
- Gloss: Flat
- Standard Colour: White
- Tint Range: As Required
- Recommended Number Of Coats: 1
- Theoretical Coverage: 25-35 square metres/ 3.7 L
- Total Solids: 50% Volume
Solid: 29% - VOC: 40 g/L
- Specific Gravity: 1.40
- Flash Point: Not Applicable
- Thinner: Water If Required (Thin up to 10% for spraying)
Surface preparation
- Surfaces must be clean and dry and free from dust, grease and other contaminants.
Application & clean Up
- Brush, roll or spray
Dry time (@ 20º & 50% relative humidity)
- Touch: 15-30 minutes
- Recoat: 1-2 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.
Prima Primer Interior Latex
Code: 1002
Product Description
A high performance product formulated for priming interior drywall and wood structures. VOC levels are low resulting in a low odor, more environmentally friendly product.
Uses
- A fast drying premium latex primer designed for all interior applications where a high hiding, low VOC product is required.
- In some applications product may be suitable for ceilings.
Technical data
- Gloss:Flat Standard
- Colour: White
- Tinting Range: As required
- Recommended Number Of Coats: Usually 1 at recommended coverage
- Theoretical Coverage: 30-40 square metres/ 3.7 L (300-400 sq.ft/gal)
- Solids: by wt. 53.0%
by vol. 37.0% - Specific Gravity: 1.40
- Flash Point: N/A
Surface preparation
- Surface must be clean and dry. Sand all tape joints.
Application & clean Up
- Brush, roll or spray
Dry time (@ 20º & 50% relative humidity)
- Touch: 15-30 minutes
- Handle: 1-2 hours
- Recoat: 2hrs+
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.
Forte Interior/Exterior Acrylic Primer
Code: 2001
Product Description
A pure acrylic product formulated for maximum durability and adhesion over properly prepared surfaces. Surfaces must be clean, dry and free from dust, grease and wax. Remove and loose or peeling paint and repair using patching compound. Glossy surfaces should be sanded.
Uses
- A premium 100% acrylic primer designed for all interior and exterior surfaces where a high hiding, durable, product is required.
Technical data
- Gloss: Low sheen-flat
- Standard Colour: White
- Colours: Available
- Recommended Number Of Coats: 1 is usually sufficient
- Theoretical Coverage: 30-40 square metres/ 3.7 L
- Solids: by wt. 50.6% by vol. 32.4%
- Specific Gravity: 1.37
- Flash Point: N/A
Surface preparation
- Surfaces must be clean, dry and free from dust, grease and wax.
- Remove any loose and peeling paint and repair using patching compound.
Application & clean Up
- Brush, roll or spray
Dry time (@ 20º & 50% relative humidity)
- Touch: 15-30 minutes
- Handle: 1-2 hours
- Recoat: 2hrs+
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.
1001 Verda Pro Latex Undercoater / Primer Sealer
Product Description
This acrylic latex paint is made from high quality pigments and binders, which give it excellent priming and sealing properties. May be top coated with alkyd or latex paints.
Uses
- Interior. New work or maintenance.
- Drywall, dry plaster, wood, concrete, concrete blocks, stucco, masonry, rough-cast, etc.
Features
High hiding, primes and seals, contains no lead or mercury, low odour, easy to apply, quick drying, non-toxic
Application & Clean Up
- Stir thoroughly before using.
- Apply un-thinned by brush, roller or spray gun.
- Surface temperature should be above 10°C, but not more than 32°C.
- Clean tools with warm soapy water immediately after use.
Colours - Tinting
White. Tint according to formulae.
Flash Point
- Non-Flammable
- Gloss: 0-2
- Spreading Rate: Up to 10 square meters per litre.
Drying Time
- To Touch: 1 to 3 hours
- Recoat: 4 to 6 hours
- Storage: Keep from freezing.
Surface Preparation
- Surface must be clean, dry and free of dirt, dust, glue, grease, oil, rust, soap, wax or any other contaminations.
- Patch all cracks and holes with a water based patching compound, let dry thoroughly and sand.
- Remove all loose paint, scrape and sand.
- New Wood: Sand wood to a smooth surface and seal all knots and sappy areas with shellac then apply Verda’s alkyd primer sealer prior to applying undercoater.
- Previously Painted Surfaces: Dull glossy surfaces by sanding.
Cautions
- Do not apply when surface is hot or in direct sunlight or if rain or heavy dew is expected.
- Let patching compound dry thoroughly before applying primer.
2001 Verda Prestige 100% Acrylic Int./Ext. Primer Sealer
Product Description
This super adherent latex primer sealer paint is in a class by itself, when compared to conventional paints. This 100% acrylic latex paint will adhere to glossy or smooth surfaces. Thereby eliminating the need of sanding. Used to prime and seal most hard to grip surfaces prior to applying latex or alkyd topcoats.
Uses
- Interior or Exterior. New work or maintenance.
- Drywall, dry plaster, wood, concrete, concrete blocks, stucco, masonite, masonry, rough-cast, galvanized metal, etc.
Features
“Bites” into smooth and glossy surfaces. Ultra hiding, primes and seals, contains no lead or mercury, low odour, easy to apply, quick drying, non-toxic.
Application & Clean Up
- Stir thoroughly before using.
- Apply un-thinned by brush, roller or spray gun.
- Surface temperature should be above 10° C but not more than 32° C.
- Clean tools with warm soapy water immediately after use.
Colours - Tinting
White. Tint according to formulae.
Flash Point
- Non-Flammable
- Gloss: 0-2
- Spreading Rate: Up to 10.2 square meters per litre.
Drying time
- To Touch: 1 to 3 hours
- Recoat: 4 to 6 hours
- Storage: Keep from freezing.
Surface Preparation
- Surfaces must be clean, dry and free of dirt, dust, glue, grease, oil, rust, soap, wax or any other contaminants.
- Patch all cracks and holes with a water-based patching compound, let dry thoroughly and sand smooth.
- Remove all loose paint, scrape and sand.
- New Wood: Sand wood to a smooth surface and seal all knots and sappy areas with shellac.
- New Galvanized Metal: For proper adhesion of the paint, wash with mineral spirits using a clean rag to remove any protective oils which may have been applied at the mill.
Cautions
4001 Interior / Exterior Alkyd Primer Sealer
Product Description
This alkyd paint is made from high quality pigments and binders, which give it excellent priming and sealing properties. May be top coated with alkyd or latex paints. Ideal as an under coater on drywall ceilings before applying texture coatings.
Uses
- Interior – Exterior. New work or maintenance.
- Dry plaster, woodwork, interior metal, plywood, masonite, previously painted surfaces, etc.
Features
High hiding, primes and seals, lead free, low odour, easy to apply.
Application & Clean Up
- Stir thoroughly before using.
- Apply un-thinned by brush, roller or spray gun.
- Surface temperature should be above 10°C, but not more than 32°C.
- Clean tools with Mineral spirits immediately after use.
Colours - Tinting
White. Tint according to formulae.
Flash Point
- Flash Point: 35°
- Gloss: 3-5
- Spreading Rate: Up to 10 square meters per litre.
Drying time
- To Touch: 3 to 6 hours
- Recoat: 24 hours
- Storage: Keep away from open flame or spark.
Surface Preparation
- Surface must be clean, dry and free of dirt, dust, glue, grease, oil, rust, soap, wax or any other contaminations.
- Patch all cracks and holes with a water based patching compound, let dry thoroughly and sand.
- Remove all loose paint, scrape and sand.
- New Wood: Sand wood to a smooth surface and seal all knots and sappy areas with shellac then apply Verda’s alkyd primer sealer prior to applying topcoat.
- Previously Painted Surfaces: Dull glossy surfaces by sanding.
For a smoother finish, sand lightly with fine sandpaper after the primer has dried before applying the finish coats.
Cautions
Use under well ventilated conditions.
No comments:
Post a Comment